Eibach Pro-Spacer/Wheel-Spacers 60mm System 8

Eibach

Eibach Pro-Spacer/Wheel-Spacers 60mm System 8

SKU: S90-8-30-005

GTIN: 4050278022774

Chevrolet Blazer S10 (10.94-12.05) nur Vorderachse

140,50 €

incl. 19% VAT , plus (Paket frei)

Manufacturers recommended retail price: 268,94 €

(Save 47.76%, i.e. 128,44 €)

Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

#productDetails.USP1Text#

#productDetails.USP2Text#

#productDetails.USP3Text#

#productDetails.USP4Text#

#productDetails.USP5Text# #productDetails.USP5Text2#

#productDetails.USP6Text#

Pro-Spacer | Wheel Spacers.

Widen your stance for better handling and appearance
Made from high-tensile-strength aluminum alloy
Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance
All applications tested in rigid durability- and fatigue tests
High-grade corrosion protection through a special coating process (salt spray test according to DIN 50021)
Significant weight advantage compared to wheel-spacers made from steel

Eibach Pro-Spacer (Wheel Spacers) is the ideal combination for use with the Eibach Pro-Kit as well the Sportline, if the original or aftermarket wheels are missing that last optical "kick".

With the Eibach Pro-Spacer installed, the car looks wider and better, as the wheel fills the arch. That’s how the car’s look gets its final touch.

By increasing the track width, not only the appearance is improved, but you also achieve an optimized driving behavior combined with higher stability, as the roll of the chassis is influenced in a positive manner.

Optimize the "sportive touch" to the last detail: wheels, tires, Eibach Suspension Components and Pro-Spacer!

The Pro-Spacer is available in different versions from 5 to 30mm width (per Wheel).

disc with a screw system
with centering collar (centering nose)
track change from 30 mm to 60 mm (disc thickness from 20 mm to 30 mm)
fastening: a) disc at wheel carrier: by using special-fi xing nut or b) wheel at disc: by using production (or accessory) nut
delivery with attachment parts
system 8: without centering collar (centeringnose)

KFZ Hersteller:	Chevrolet
KFZ Modell:	Blazer
KFZ Typ:	Blazer
Fitting for:	Chevrolet Blazer S10 (10.94-12.05) nur Vorderachse
total track widening per axle (mm):	60 mm
scope of delivery:	1 pair (for 1 axle)
Technical details:	bolt pattern 5/120,65 Centre bore 70,1mm original thread: M12x1,5
TÜV (Product type approval):	§ 21-Abnahme (Without- German TÜV Gutachten! - only affects Germany)
Note 1:	Our wheelspacers are produced in consideration of the original wheels. When using acessory- or specialwheels, you have to check, if these wheels comply with the necessary requirements. Expecially on cars with studs/nuts. Further we point out, that the larger the wheelsize is, the sensitively reacts the steering in relation to vibrations. (Often caused by badly balanced wheels.) In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. Wheelspacers always should be mounted by hand. - Don´t use electric or pneumatic tools as this could cause vibrations because of misfit on the wheelhub.
Note 2:	When using the wheelspacers you have to verify that the wheels being used have suitable cut-outs to take up the original bolts. Without these cut-outs it is not possible to use the wheels or wheelspacers! Please check as follows: Stud lengh (e.g. 25mm) minus spacer-thickness (e.g.15mm) = 10mm exess length. So the cut out should have 11mm depth to take the original stud. Further the cut out should have minimum 22mmx22mm height/width to take the overlaping nut. ATTENTION: when using 15 mm spacers at least 7 mm deep cut-outs are needed as the nuts stand over the contact surface!
Note 3:	The original bolts have to be changed against shorter bolts or cut to length.
Note 4:	As the diameter of the center stud can vary, the wheelspacers only can be centered by the studbolts/nuts.